Two Products of interest to WA Sn Modellers

Two products I have used recently which may be of interest to members of our S scale group are locomotive number plates from Narrow Planet and hand-rail posts for hooded diesel locomotives from A-Line in the USA.

Narrow Planet is a company in England that makes kits and bits for the narrow gauge enthusiast.
I recently ordered and received some number plates for two of my steam locos and for three Y class diesel locos. Steve at Narrow Planet is very helpful. You can order up to two sets of 3 number plates for 4 pounds sterling delivered to an address in Australia which is a very good deal. These are etched brass oval number plates, as appeared on all WAGR steam locomotives and on the B, M, MA, Y and Z class diesels.

Steve at Narrow Planet makes them to order for you. They are exquisite and very reasonably priced. They come in a standard envelope through the post once your order is finalised to your satisfaction. Payment is by B-Pay. They are listed on the Narrow Planet Website with the other 4mm scale number plates under the heading Western Australian railways. Steve originally did the artwork for an order from Andrew May who recomended them on this very blog. They are however made to S scale, not 4mm scale. You just need to remember to order 3 plates for steam locomotives (two for the loco and one for the rear of the tender) and two for the diesels which had oval number plates. This needs to be done with the order in the section where you can write in your special request which goes as an email. Steve answers all emails and orders fairly promptly. the plates arrived in about 3 weeks. The three sets of Y class loco number plates can be seen below. They cost 9 Pounds or about A$25 delivered.

Y class number plates. Artwork is sent to the customer prior to final order being made up.

The second product, metal handrail posts, were first brought to our attention by Richard at the December 2014 meeting of the S scale group. These are made by A-line but are best ordered from Walthers on-line store. A-line do not deliver overseas. I recently ordered 2 packets of the medium handrail posts for my two A class locos, my C class DE loco and my MA DH loco. Richard was the first to use them on his D class loco. You get 35 posts in each packet so I calculated that I needed two packets. I ordered the medium or 5/8" ones which worked out well. I used 0.5mm brass rod for the actual handrails which thread through the eye of the posts quite easily. the smallest dab of super-glue keeps them rigid once you have fitted them.  These are also delivered in a small padded envelope by normal overseas mail. They say to allow up to 6 weeks but I think they arrived in half that time.

Happy Modelling.

D/DA Diesel Loco - 3D Printed

The first test prints have arrived for both the D and DA class diesels.  Both models have now been assembled and are running, including DCC and sound (Tsunami EMD645 non-turbo).

The model is designed to use a Hollywood Foundry mechanism, which can be supplied with the correct axle spacing.  Hollywood Foundry don't offer the correct size (15.7 mm) wheels in their normal range, so the wheels are from Northyard but Hollywood Foundry can fit them to their bogies during the normal assembly process at no extra cost, other than the cost of buying the wheels.  

The cosmetic bogie sideframes will be 3D printed as well.  

There is more info on the Marbelup Models blog.

Test print of D class fuel tank, with 7 layers of lead sheet added.
Weight: 166 grams.  Top 2 layers have central gap to clear motor.

Butlers Swamp Models for 3D printed fine detailed scale model train kits

Hi Everyone,

Its about time I let people know I have started a little kit manufacturing empire of my own, Butlers Swamp Models.

The former name of Lake Claremont near where I currently live, and the name to the original siding nearby before Claremont Railway Station was built on the Eastern Railway (Western Australia).

First model to be released under this brand is my 3D printed A Class bogie for the Railwest kit, which I am absolutely sure will be a cracker.

Why release an extra piece for this already awesome kit, well the resin side frames while they look acceptable I think will look a little out of place. And since I had been working on my own scratch built A Class for some time and have been converted to 3D printing along the way, I was not happy with the appearance nor having to chop up the resin side frames for mine, I was going to create these anyway so I am excited to offer them to you as well.

Please see my new page here to get more details and to order.

http://butlersswampmodels.blogspot.com.au/

Peter

The Midlander Decal Set

The latest release from Westland Models is the name board decals for The Midlander train.

The Midlander Name Board Fitted to a AZ Carriage

The Midlander was the name given by the WAGR for the new service that ran between Perth and Geraldton over the former Midland Railway between 1964 and 1975.

Initially the train set was painted in Red and Cream and fitted with the gold name boards, later in the 60's the train set was painted Larch Green and the white name boards were fitted. 

Decal Artwork

The decals are supplied in a set of three (one spare in case of a mishap) and both styles are available.

Note: The name board is not included and the decal will not include the red or green backgrounds.  

RA Class Diesel - 3D Printed

This week, I received the first test prints for an RA class diesel from i.Materialise.  Converting the 3D drawings from the R class turned out to be easier than I thought, taking about 1.5 weeks of "spare" time, compared to several months to draw the R class originally.

Although the bulk of the long hood is the same as the R, the RA is about 16 mm longer overall, with the extra length being noticeable in the "front porch", short hood, the louvre panels behind the cab and the fuel tank.  The RA doesn't have dynamic brakes, so the vents at the rear of the long hood on the R had to be "blanked" over.  The headlights are different too, with two lights side-by-side rather than one above the other.

Note that the RA is presently sitting on temporary dummy inner bogies (3D-printed in blue) fitted with 12 mm diameter wheels rather than the intended 14 mm diameter, while awaiting delivery of drive bogies from Hollywood Foundry.

Starting Construction of my Pemberton Layout

After getting back into modeling several years ago after a rather long break, I have spent several years contemplating a plan for a model railway to capture the atmosphere of the Pemberton railway yard, the mill and some of the bridges of the Pemberton line. Struggling to work out how i would fit these aspects into a room of the house i have been renting in that time and deciding which room would be best has led to a slow start, but after much research into the layout of the yard, the mill and the surrounds, I have finally made a start. My initial plans seemed good on paper until i realised the curves i had drawn where too tight to achieve and whilst the revised plan is still developing I finally began construction of the first sections of the layout earlier this year.

My starting point has been the Pemberton yard itself, with an aim that the centre section of the layout would be as close to scale as possible and would include the station, goods shed and loading dock, whilst the rest would be a compromise in order to meet the limitations of the room.

The following blog will follow the construction of the layout as it progresses: http://pembertonrailway.blogspot.com.au/

AVL 314 Buffet Lounge Car

In 1958, the WAGR converted Dining Car AV 314 into a Buffet Lounge car for use on the Westland.
 It retained all of its external AV dining car features, but lost its crown light windows and was reclassified “AVL”, entering service that year in the larch green livery.

In 1962 as part of the carriage refurbishment program, AVL 314 was further modified to improve its facilities. The end platforms were closed in, though it did retain its tongue and groove side timbers and the old dining car kitchen was completely rebuilt for buffet use. It was fitted with Bradford-Kendall “Commonwealth” ride control bogies, Evaporative Air –Conditioning (possibly a first for the WAGR) and could seat 21 passengers. The new larch green and cream livery was applied and it returned to service in March, 1962.

With the WAGR takeover of the Midland Railway Co. in 1964, AVL 314 was one of four cars to be chosen to become part of the consist for the new “Midlander” service to run between Perth and Geraldton and was repainted into a special Red and Ivory livery. The Midlander only operated on weekdays and so on weekends AVL 314 and the other Midlander cars were used to form the “Albany Weekender” consist.

One passenger said of the AVL on the Midlander
“In June 1966 we travelled to Geraldton in a first class sleeper and after leaving Midland we made our way down to AVL 314 to have an evening meal sitting at the rotating bar stools that were located at the buffet counter. This was my first dining experience on a train and as a ten year old I was over the moon. Even though it was a Wednesday evening the train was quite busy and the conductor assisted the buffet attendant for a time. As more people arrived for meals the conductor offered to serve our tea and coffee in the lounge section in order for the buffet counter to be used by other customers. We returned on The Midlander the next week and because we were only travelling as first class sit up passengers we were offered seats in the Lounge section of AVL 314 where we also enjoyed a breakfast. 
As well as the evaporative cooling the car was also fitted with Commonwealth ride control bogies which gave an ultra smooth ride.  It was a truly memorable experience.  In fact all of the buffet cars of the WAGR had very high standards of appointments all with a certain individual style. Quite an achievement really due to what was really a very small passenger operation”.

In December 1967, due to the mismatch of liveries when interchanging or adding booster cars to the consists, the lounge car, along with the other Midlander cars, was returned to the green and cream livery, and it then continued to run on the Midlander and Albany Weekender services until the demise of those trains.

AVL 314 was written off in December 1975 and was stored at the Midland workshops till September 1976 when it was painted yellow and re-issued to traffic as a workmans van as part of the breakdown train where it remained until being leased by the ARHS in 1988, arriving at the museum in June for restoration.

Currently AVL 314 has seen some restoration take place and can be found at the ARHS museum, in the back roads, somewhat unloved and incomplete – far from its former glory when it could be found working on three of the WAGR’s named trains.

Information sourced from “A History of WAGR Passengers Carriages” by A. May and B. Gray

AVL 314 - The Model

The model of the AVL came to be during the first half of 2014 whilst our group was constructing the layout "Mogumber Bridge" for this years annual Model Railway Show. The layout being based on the Midland Railway Co. line during the 1960's period was to be operated with MR rolling stock for the Saturday and then WAGR stock on the Sunday & Monday. As group we mostly had sufficient equipment to cover our operating needs but during discussions on this matter it was realised that to operate a WAGR "Midlander" -the main WAGR passenger service - the only car in the basic consist that we did not have was the Buffet Car AVL 314.  

Without too much thought, I suggested "Why not build one" ! 

Being only 3 months out from the show weekend, this suggestion was met with some doubt about the possibility of achieving a completed model in such a short time. After going home and doing a bit of research I decided that I would have a go at it.  As the AVL was originally an AV dining car I figured that I could use the pre-existing AV sides and floor from a Railwest kit and with a bit of Kit Bashing, it would be possible to produce the model AVL we required to make up our "Midlander" at the show. After discussing my thoughts with Graham of Railwest it was agreed that I could have a set of their AV parts I required if I could make it happen before the June long weekend Show.

Here below is the where the project started with two AV dining car sides.

 After a visit to the museum to measure up and photograph the real carriage, I set about the modifications to the sides which would involve shifting a window from the kitchen side to the corridor side, building new end sections with vestibule doors and toilet compartments and paneling across the top row of windows and adding detail. Here below is the modified car sides ready to be moulded in rubber. You can see that essentially the window pattern is still the same but the car is much changed at its ends.

  Once the car sides were finished, new end and internal walls were built and after moulding and casting parts, I commenced actual construction of the prototype model of the AVL.

On the 30th of April, just 7 weeks after the discussion of producing a model took place, AVL 314 made its maiden voyage on the Mogumber Bridge layout during a trial setting up of the layout hauled by X1023.

Some innovations have been built into the AVL kit that I have not previously had with my earlier carriage kits.The windows have recesses cast behind the window for fitting of glazing, The ends of the cars have the buffer beam added so that the floor will sit between all of the walls of the car and the floor itself has had all of the tanks, battery boxes and vacuum cylinders added to enable it to all be cast in as one piece to make it easier for the modeler as well as to give a much stronger/rigid floor casting. New detail parts also had to be made such as the large kitchen vents and circular vents as well as using 3d detail decals for louvres.

The AVL was certainly not a car I had considered making a model of but after researching and planning for the model I have come to appreciate what a versatile carriage it was when it was in service for the WAGR.  

As such I had not really planned to build this particular model but as one was needed for completion of a consist for the show, I feel the project has been a worthy challenge which has added another passenger car model to compliment those kits I already produce. The AVL kit is now available