Monday, March 7, 2016

Westrail/ARG WQN/AQNY


Westrail introduced the 61 strong class WQN standard gauge flat wagons in 1998 and they were manufactured by United Goninan at Bassendean.
Each wagon carries 2 - 6.1m containers for use on the Sulphur train between Kwinana and Malcolm siding.

Loaded AQNY 32208Y at Kwinana.

Empty AQNY 32209A at Kwinana.
The model is depicted post 2012 after reclassification to class AQNY under ARG ownership. 
It is primally constructed of sheet styrene; 0.5mm for the side webs which then narrow down to form the centre sill over the bogies. The top & bottom flanges are 0.4mm & 0.25mm thick styrene respectively. Sections of sheet brass were added in the end platforms for strength and after the styrene angle braces were added the body felt much stronger.
American models roller bearing bogies, NWSL wheels and Kadee HO No. 118 couplers were used.  The air brake reservoir was 3D Printed by i.Materialise and the brake piping was added with 0.04 & 0.05 phosphor bronze wire from Tichy. The brake wheel & gearbox were from Detail Associates (now discontinued) and attached to a stand made from styrene angle.

A construction photo
primer coat - in the spray booth 
Prior to weathering




second attempt at weathering the deck - this time with rust coloured pigments


The model was airbrushed using Vallejo Desert Sand acrylic primer as a base and Polly Scale Railbox yellow, followed by a light coat of Polly Scale CN Yellow No. 12 on the sides, all thinned with their respective thinners. The CN Yellow is quite a good match for the Golden Yellow used by WAGR and later Westrail. As the Polly Scale line of paints have now been discontinued the CN Yellow was rationed and the final weathering will cover most of the Railbox Yellow colour.

I created by own artwork for the decals and had them printed through Westland Models, using  Microscale Decal Set to settle them down to the paint. Details were pickd out with Lifecolor paint, using black, white orange & rust dark shadow.

Finally a coat of Model Master clear flat was applied to seal & protect the decals and hide the decal 
film, weathering was done with a selection of Lifecolor acrylic brown paint and pigment powders.

Next project are the containers...

GS

2 comments:

  1. Wow Gavin - the model was great before but thats some awesome weathering - just how I remember them

    ReplyDelete
  2. Thanks Neil, very happy with how it turned out - once I started there was no going back.
    Considering I hadn't weathered any models since the DB 25 years ago even better. I am thinking that none of my future models will be left clean from now on as it makes them look so much more realistic.

    ReplyDelete