Hey hey, since my last post I have continued to remain busy making models each Thursday at AMRA WA with other members of the S scale group, my latest project being a GA Models LA Ballast Hopper. I must say this has turned out to be one of the better kits I have assembled and I’m rather pleased with the end result.
 |
| The kit as it is sold. One must still supply vacuum pipes, wheels, W irons and couplers. |
The kit needed very little cleaning of parts and glued together with Zap CA glue with ease. To understand the wagon’s design better, I happened to come across a preserved LA wagon in Mingenew when up that way visiting family. The photos were useful in especially working out the vacuum through pipes.
 |
| LA wagon plinthed at Mingenew Station. |
This was a preserved wagon but far from the right colour for an LA in later years of service which is what I chose to model. Luckily a few images of the LA in Westrail service appear on the Rail Heritage WA website which I found to be great reference photos. Using this photo and some very rudimentary measurements from the wagon, I sent off to Custom Hobby Decals in QLD to get the decals made. At under $70 for a set of 5, I’d recommend them again. This is the same company that made the decals used on my DB and F class locos.
 |
| LA23811 image courtesy of Rail Heritage WA. |
This image lead me discover one big part missing from my nearly completed model… hungry boards. So I turned to the one place I know I can get great advice; the Thursday modeler’s group. With a bit of experimenting with styrene, and a lot of encouragement, I created some hungry boards which turned out rather well.
 |
| The kit assembled as per the instructions. |
 |
| LA kit painted in Tamiya TS1 Red Brown with added hungry boards. |
Whilst I waited for the decals to arrive, I trialed some colour on the LA model. When I sprayed the first coat of Tamiya TS1 Red Brown, I took some time to look at the wagon compared to prototype photos and found that I was not happy with the shade of Brown. That’s when I returned to my Thursday modelers brains trust and discovered Dulux red oxide primer which is much closer to the WAGR/Westrail colour.
 |
| Comparing the Humbrol H70 (GE wagon) with Dulux Red Oxide Primer. |
Once the decals arrived and I was happy with the colour, I sprayed a layer of gloss clear coat to give a smooth surface for the decals to adhere to. Once dry, the decals were soaked in water with a few drops of Micro Sol solution and applied to the model. These decals are really easy to work with and the size was spot on.
 |
| The finished and decaled model. |
The last steps to go is to dull coat over the top and weather but I think that’s for another blog post. Now to start the next 4x LA wagons.